Monthly Archives: June 2016

What is Sanity Testing?

What is Sanity testing?

Sharing information on Smoke testing in the earlier articles, in today’s software testing class here in this article it is explained about the sanity testing. In this post it is explained what is a sanity testing, sanity Testing definition and tips on sanity testing.

What is a sanity Testing?

After receiving a software development with the minimal issues repairs in rule or performance, sanity tests carry out to examine whether the bugs reported over the develop are fixed & there is regression introduced due to these repairs i.e. not splitting any previously operating performance. The main aim of sanity testing to examine the planned performance is being predicted. Instead of doing whole regression testing the sanity tests are performed. It can be done as a part of manual testing as well.

Sanity tests helps to save lots of time and cost involved in testing if the develop is failed. Specialist should reject the develop upon develop failure.

After completion of regression testing the sanity tests started to examine the defect repairs & changes done in the applying program is not smashing the core performance of the applying. Generally this is done near end of SDLC i.e. while releasing the applying. You can say that sanity tests a subset of approval testing. We can also say Specialist Acceptance Testing for sanity testing. sanity tests filter & strong strategy of testing, it needs to concentrate restricted & main features of testing in specific.

Here are the few consolidated points of sanity testing:

  1. sanity testing follows filter and strong strategy with specific testing of some restricted features.

  2. sanity tests typically non-scripted.

  3. sanity tests a sub-set of regression testing.

  4. sanity tests cursory testing to prove software application is being mention in the specification documents & meets the user needs.

  5. sanity tests used to verify the requirements of end users are meeting or not.

  6. sanity testing to examine the after minimal repairs the small section of rule or performance is being predicted & not splitting related performance.

Hope you get clear idea of sanity testing in the above article & cleared any confusions on sanity testing.

Sanity testing is the part of Regression testing and it is completed when we do not have enough here we are at doing testing.

Sanity tests the outer lining area level testing where QA professional confirms that all the choices, features, instructions available in the item and venture are working excellent.

Sanity testing Example

For Example in a venture there are five segments like sign in web page, homepage, customer details web page, new customer growth, and process growth etc. So we have the bug in sign in web page like on sign in web page login name area allows the less than six alpha-numeric figures which are against the necessities as in specifications it is specified that login name should not be below six figures but as login name allows the less than six figures it is the bug.

So now the bug is revealed by the testing group to the designer group to fix it. When the creating group repairs the bug and approved it to testing group than the testing group assessments the other segments of the applying means assessments that fix bug has no effect on the performance of the other segments but keep one point always in mind that testing group only assessments the ultimate performance of the segments, do not go strong to analyze the facts because of the short time structure so this is the sanity testing.

Sanity tests conducted after the develop has clear the smoke analyze and has been approved by QA group for further testing, sanity testing assessments the most important performance with better information.

When we Execute Sanity Testing?

Sanity tests conducted when group needs to know quick state of the item after they have done changes in the code or there is some managed rule change in an element to fix any crucial problem, and strict launch time-frame does not allow complete regression testing.

Conclusion:

Sanity testing will be done mostly after retest (retest will be done after solving the bug). It is always used Program for smoke but not for sanity. You can join the software testing course in Pune to make your profession in this field.

More Related Blogs:

  1. Software Testing and Risk Analysis
  2. Verification and Validation Process In Software Testing

Various Software Errors

7 types of software errors that every tester should know

A Software Bug is a mistake, defect, failure or an error in a software system or system that causes it to generate the wrong or surprising result, or some thing in random ways. Most bugs occur from errors made by people in either a program’s source system code or its design, or in frameworks and operating-system used by such programs, and a few are triggered by compilers generating wrong system code. It’s time again for an article on application examining fundamentals. This informative article is on types of application defects that every evaluators should know. It is related to Quality Assurance.

Software bugs are of many kinds. A bug is a bug no matter what. But sometimes, it is important to understand the characteristics, its effects and the cause to process it better.

This assists in quicker response first and foremost, appropriate response.

Common Types of Software Errors:

#1) Performance Errors:

Functionality is a way the application is supposed some thing. Software has a functionality mistake if something that you anticipate it to do is hard, uncomfortable, complicated, or difficult.

Expected Performance for Terminate key is that the ‘Create new project’ display should near and none of the changes should be stored (i.e. no new venture must be created). If the Terminate key is not clickable then it is a functionality mistake.

#2) Interaction Errors:

These mistakes appear in communication from application to end-user. Anything that the customer needs to know in order to use the application should be made available on display.

Few illustrations of communication mistakes are – No Help instructions/menu offered, functions that are part of the discharge but are not recorded in the help selection, submit known as ‘Save’ should not remove information etc.

#3) Losing control errors:

This display allows the consumer to develop a new venture. However, there is no choice for the consumer to quit from this display without allowing the venture. Since ‘Cancel’ option/button is not offered to the consumer, this is military services weapons control mistake.

#4) Syntactic Error:

Syntactic mistakes are wrongly spelled terms or grammatically wrong phrases and are very obvious while examining application GUI. Please remember that we are NOT mentioning to format mistakes in code. The compiler will notify the designer about any format mistakes that appear in the code

#5) Error managing errors:

Any mistakes that happen while the consumer is communicating with the application needs to be managed in a clear and significant way. If not, it is known as as an Error Handling Error.

Take a look at this area. The mistake concept gives no sign of what the big mistake actually is. Is it missing compulsory area, preserving mistake, page running mistake or is it a program error? Hence, this is an ‘Error Passing Error’.

#6) Computation Errors:

These mistakes happen due to any of the following reasons:

Bad logic

Incorrect formulae

Data type mismatch

Programming errors

Operate call problems , etc.

In 1999, NASA missing its Mars environment orbiter because one of the sub-contractors NASA applied had used British models instead of the designed measurement program, which triggered the orbiter’s thrusters to work wrongly. Due to this bug, the orbiter damaged almost instantly when it reached Mars.

#7) Management circulation errors:

The control circulation of a application package explains what it will do next and on what situation.

For example, consider a program where customer has to type on a webpage and the choices available to customer are: Preserve and Close, and Terminate. If a customer clicks on the mouse ‘Save and Close’ key, the consumer information in the proper execution should be stored and the proper execution should near. If simply clicking the key does not near the proper execution, then it is a control circulation mistake. Thus you can join the Software Testing Course In Pune to make your profession in the field of Software Testing.

More Related Blog:

Software Development Life Cycle Overview

Why is Software Testing Important?

Why is Software Testing Important?

Software testing is mandatory because we all earn some mistakes. Some of those errors are insignificant, but some of them are costly or significant. We need to confirm everything and anything we produce because factors can always go wrong – people make some mistakes all the time.

Since it can be assumed that our work may have errors, hence everyone need to confirm their own work. However some errors come from bad presumptions and sightless spots, so we could make the same errors when we examine our own function as we made when we did it. So we may not notice the faults in what we have done.

Preferably, we should get someone else to confirm our work because another person is more likely to spot the errors.

There are several factors which clearly tells us why software testing is essential and what are the major stuff that we should consider while testing of any item or application.

Software testing is very essential because of the following reasons:

  1. Program testing is really needed to point out the problems and errors that were created during the growth stages.

  2. It’s essential since it makes sure of the Customer’s reliability and their satisfaction in the applying.

  3. It is very essential to ensure the High high company’s item. Quality item delivered to the clients helps in gaining their confidence. (Know more about Program Quality)

  4. Tests necessary in order to provide the facilities to the clients like the delivery of top high quality item or software application which requires lower maintenance cost and hence outcomes into more accurate, consistent and reliable outcomes.

  5. Test is essential for an effective workance of software application or item.

  6. It’s essential for making sure that applying should not result into any failures because it can be very costly in the future or in the later stages of the growth.

  7. It’s needed to stay in the business.

Today’s fast growing world of the Internet client wants to get items to be applied and modified faster than their competitors. Customer wants more for application produces with new features to be applied in brief time frame (as beginning as possible), but they don’t like to work with defected application. As next version of the item will produces in next few times, & gets only a short period of examining before it is delivered. So due to this brief time frame or ongoing produces the more insects gets stacked up into items and which gets fixed in the next release, correct? Yes definitely, this model has its own problems. Launching such application with so many insects into it may impacts the consumer experience that creates bad impact on top quality impression of your company brand. They will remember about the delivered bad top quality item, so there will be Significance of examining that creates vital part in SDLC.

Usually application tests considered as one stage of the application growth life-cycle. There’s something to be said for including examining in all stages, however. Let’s take a look at what the advantages are and how this approach could enhance your application growth. Software Testing is the process of discovering insects in the application & make the application bug free.

In the Software Development Life Cycle(SDLC) the Testing or quality assurance performs an significant part, which helps to increase the top quality, reliability & performance of the program with all examine what all functions application expected to do & also make sure Software packages are not doing what he not expected to do.

There are major Significance of examining in the part of SDLC and it is better to present examining in the initial stage of SDLC stages so it help to identify the problems in the initial stage & try to avoid the insects discovering & get take care of in the last critical level. If you know to do the above mentioned stuffs then you can be a part of Software Testing Job in Pune.

More Related Blogs:

Promising Career Options In the Software Testing Domain

Agile Model In Software Testing

What is Smoke Testing?

What is Smoke Testing?

Smoke Testing is a testing strategy that is motivated from elements testing, which assessments for the smoke from the hardware elements once the hardware’s power is turned on. In the same way in Application testing or functional testing perspective, smoke testing relates to test the standard performance of the develop.

If the software testing is not able, develop is announced as volatile and it is NOT examined any longer until the smoke test of the develop goes.

Smoke Testing includes most of the most important features of the application but none of them specific. The result of this analyze is used to decide whether to continue with further Testing. If the smoke test goes, go forward with further Testing. If it is not able, stop further assessments and ask for a new build with the required repairs. If a program is poorly damaged, specific Testing might be a pointless and effort.

Smoke testing helps in revealing Integration and significant problems early in the pattern. It can be conducted on both recently created application that has been improved application. Smoke testing is completed personally or with the help of automated tools/scripts. If develops are prepared frequently, it is best to improve smoke Testing.

As and when an program becomes older, with addition of more features etc, the smoke testing needs to be made more extensive. Sometimes, it takes just one wrong personality in the rule to provide an entire program ineffective.

Smoke Testing – Features:

Determining the business crucial functions that a product must fulfill.

Developing and performing the standard functions of the applying.

Guaranteeing that the smoke test goes each and every develop in order to continue with the testing.

Smoke Assessments allows discovering apparent mistakes which helps you to save effort and time of test group.

Smoke Assessments can be guide or computerized.

Smoke tests the preliminary testing process worked out to examine whether the application under test is ready/stable for further testing.

The term ‘Smoke Testing’ is derived from the hardware testing, in the hardware testing preliminary successfully pass is done to examine if it did not capture the flame or used in the preliminary change on.

Prior to begin Smoke testing few test situations need to be created once to use for smoke testing. These test situations are implemented before to begin actual testing to examine crucial functions of the program is working excellent. This set of test situations published such a way that all performance is confirmed but not in strong. The potential is not to carry out comprehensive testing, the specialist need to test the navigation’s & including easy things, specialist needs to ask a quick question “Can specialist able to access software application?”, “Does customer navigates from one screen to other?”, “Check that the GUI is responsive” etc.

The test cases can be accomplished personally or automated; this relies upon the work specifications. In this types of testing mainly concentration on the important performance of program, specialist do not care about specific testing of each software element, this can be cover in the further testing of program.

The Smoke tests generally implemented by evaluators after every develop is obtained for verifying the develop is in testable condition. This type of tests appropriate in the Integration Testing, System Testing and Approval Testing levels.

Advantages of Smoke testing:

It allows to discover problems presented in integration of segments.

It allows to discover problems in the early stage of testing.

It allows to get assurance to specialist that repairs in the past develops not splitting major functions (off course, only functions worked out by smoke testing).

Thus you can join the software training institute in Pune to make your profession in this field.

More Related Blogs:

  1. Software Testing- Quality Control And Quality Assurance
  2. Purpose And Objectives Of Software Testing

What Is Requirement Traceability Matrix and Why Is It Needed ?

What Is Requirement Traceability Matrix and Why Is It Needed ?

A traceability matrix is a part of software testing process and is used to track whether the requirements are met or not.

Definition:

A traceability matrix is an archive that compares any two-baseline documents that require a many to-many relationship to check the fulfillment of the relationship. It is utilized to track the prerequisites and to check that the present project necessities are met.

Requirement Traceability Matrix or RTM catches all requirement proposed by the customer or development team and their traceability in a solitary report conveyed at the finish of the life-cycle.

At the end of the day, it is a document that maps and follows client requirement with the test cases. The fundamental motivation behind Requirement Traceability Matrix is to see that all test cases are secured so that no functionality ought to miss while testing.

Different Types of Traceability Matrix:

  1. Reverse Traceabilty Matrix:

It is utilized to guarantee whether the present product stays on the desired track. The reason behind this sort of traceability is to check that we are not extending the extent of the venture by including code, design components, test or other work that is not indicated in the prerequisites. It maps test cases to prerequisites or requirements.

  1. Forward Traceability:

This matrix is utilized to check whether the task advances in the wanted course and for the right kind of product. It ensures that every necessity is connected to the product and that every prerequisite is tested completely. It maps test cases and requirements together.

  1. Bi-directional Traceability:

This traceability matrix guarantees that all requirements are secured by test cases and test scenarios. It dissects the effect of a change in requirements influenced by the defect in a work product and the other way around.

Some of the parameters of Requirement Traceability Matrix are as follows:

  • Requirement ID

  • Risks

  • Requirement Type and Description

  • Trace to design specification

  • Unit test cases

  • Integration test cases

  • System test cases

  • User acceptance test cases

  • Trace to test script

QA teams don’t create the BRD and TRD. Likewise some organizations use Funtion Requirement Documents (FRD) which are like Technical Requirement Document; however the procedure of developing traceability matrix continues as before.

WorkFlow of RTM:

The Matrix is bi-directional, as it tracks the requirements ahead by analyzing the yield of the deliverables and in reverse by taking a gander at the business prerequisite that was indicated for a specific component or feature of the product.

Benefits of Traceability Matrix:

  • It specifies if any of the requirements are missing and inconsistencies are there in the document.

  • It ensures 100% test coverage.

  • It helps in investigating or assessing the effect on the QA team as for returning to or re-chipping away at the test cases.

  • It depicts execution status or overall defects keeping in mind business requirements.

Vital Points About Traceability Matrix:

  1. On the off chance that there is a technical design document or use cases or some other ancient rarities that you might want to track you can simply expand the above created record to suit your requirements by including extra columns.

  2. When this “defects” section is utilized to build up the retrogressive traceability we can tell that the “New client/user” functionality is the most defective. Rather than reporting that this and this test case failed, TM gives a straightforwardness back to the business prerequisite that has most defects in this way demonstrating the Quality as far as what the client wants.

  3. As a further stride, you can shade code the defect ID to demonstrate to their states. For instance, defect ID in red can mean it is still Open, in green can mean it is closed. When this is done, the TM acts as a wellbeing check report showing the status of the deformities relating to a specific BRD or FSD usefulness is being open or shut.

This was regarding RTM. Search for Software Testing job in Pune, to get to know the current openings.

More Related Blogs:

Important Guidelines For Writing Test Cases

Promising Career Options In the Software Testing Domain

Points of Difference Between Regression Testing and Functional Testing

Points of Difference Between Regression Testing and Functional Testing

Daily Batch Processing is a series of mainframe tasks used by a financial institution daily to reunite day to day client dealings.

B is a GUI (Graphical User Interface) program which is used by financial institution workers to evaluation dealings of financial records as per client concerns.

C is a GUI (Graphical User Interface) program which is used by financial institution workers to evaluation dealings of bank card records as per client concerns.

L is a GUI (Graphical User Interface) program which is used by financial institution workers to evaluation dealings of loan records as per client concerns.

Assume that all tasks in batch processing relevant to programs B, C and L are connected each other.

Now there is rule modify for job that procedure program B and this job modify triggered to modify GUI of a B.

Testing Requirements:

Functional Testing:

Now it is evident that evaluators need to test below

1. Jobs that procedure the information to nourish program B

2. Application B GUI rule changes

So the testing of 1 and 2 above is known as Efficient testing i.e any testing to validate the suggested program behaviour is known as functional testing.

Regression Testing:

As we believed above in the importance, the Jobs that procedure information nourish to GUI B is connected to other tasks which procedure information nourishes to C and L. Now it is tester’s liability to make sure that there are no effects to tasks that procedure information nourishes to programs C and L due to rule changes happened on tasks that procedure information nourish to B. So this type of tests known as Regression Testing.

Regression testing and functional testing are all different, in fact. Both form a part of software quality assurance process.

Regression tests the act of retesting a product around an area where a bug was set. If a data access element is modified, for example, to enhance security, the rule straight impacted by that change will be regression examined. A good group will also analyze relevant rule such as UI-based features which make use of the methods and/or category suffering from the fix.

Functional tests an overridden term most frequently used to relate to the testing of application features (functional points) independently. Focus is placed on performance within the product, and very little time is invested testing how that efficient device combines with other efficient models.

Regression testing is a type of application testing that confirms that application previously developed and examined still works properly after it was modified or interfaced with other application. Changes may consist of application improvements, areas, settings changes, etc. During regression testing, new application insects or regressions may be discovered. Sometimes a application package modify impact research is conducted to find out which places could be affected by the suggested changes. These places may consist of efficient and non-functional places of the system.

The purpose of regression testing is to ensure that changes such as those described above have not presented new mistakes. One of the significant reasons for regression testing is to figure out whether a alternation in one part of the application impacts other parts of the software

Functional testing a quality assurance (QA) process and a type of black-box analyzing that angles its analyze cases on the requirements of the software component under analyze. Functions are tested by providing them with food feedback and analyzing the outcome, and internal program structure is rarely considered (not like in white-box testing). Efficient analyzing usually explains what it does.

Functional analyzing does not suggest that you are analyzing a function (method) of your component or class. Efficient analyzing assessments a piece of performance of the whole program. You can join the software testing course in Pune to make your profession in this field. CRB Tech is one of the best institute for software testing in Pune.

More Related Blogs:

  1. Important Guidelines For Writing Test Cases
  2. Agile Model In Software Testing

Test Plan: An Integral Part of Software Testing Process

Test Plan: An Integral Part of Software Testing Process

A software test plan forms the core of the software testing process. It is one of the primary things that is required before one actually proceeds with the testing or Quality Assurance. Be it functional testing or any other kind of testing.

Definition:

A test plan is nothing but a written document that in detail describes the activities and the testing scope. It is a part of the formal process of testing any product or software under a project.

A document depicting the approach, scope, resources and calendar of planned test tasks. It recognizes amongst others test things, the modules to be tested, the testing tasks, who will do which task, level of tester freedom, the test environment, the test design procedures and entry-exit criteria to be utilized, and the method of reasoning for their choice,and any risks requiring possibility planning. It is a record of the test planning process.

Template Design for a Test Plan:

The layout and content of a product test plan differ contingent upon the standards, processes, and test management tools being used. In any case, the accompanying format, which depends on IEEE standard for software test documentation, gives a rundown of what a test plan can/ought to contain.

Test Plan Identifier:

  • Assign a unique identifier for the test plan document. It can simply be a unique number assigned to the plan. It helps in identification.

Introduction:

It involves the following

  • Goals and targets need to be mentioned over here.

  • Write an overview of the test plan.

  • Mention the constraints; if any.

Reference:

  • Enlist the names of the related references alongwith the links, if available, and include these as well:

Project plan.

Configuration management plan.

Items:

  • List down the different test items i.e. software/products and their versions.

Features to be tested:

  • Enlist those features of the software that are required to be tested. The ones mentioned here are then tested with the help of test cases.

  • Mention the requirements and/or design specifications of those features to be tested.

Features not to be tested:

  • Enlist those features of the software/product that will not be tested.

  • Mention the reasons why these features won’t be tested.

Approach:

  • Define overall approach to testing

  • Mention the testing types, testing methods, testing levels etc.

Pass/Fail Criteria:

Indicate the criteria that will be utilized to figure out if every test item (product/software) has passed or failed the tests.

Responsibilities:

List down the roles and responsibilities of each test team member.

Risks:

  • Jot down the risks identified.

  • Also specify the contingency and mitigation plan for each risk.

Schedule:

Give an outline of the timetable, indicating key test milestones, and/or give a link to the detailed calendar.

Estimate:

Give an outline of test estimates (expense or effort) and/or give a link to the detailed estimation.

Some of the important points of the test plan template are covered here with the details. Many more can also be included in it. It depends on the requirement.

Guidelines for a Test Plan:

  • Design the plan in a compact manner. Maintain a strategic distance from repetition and vagueness. On the off chance that you think you don’t need a section that has been specified in the layout above, simply move ahead and erase that section in your test plan.

  • Be particular. For instance, when you mention an O.S. as a property of a test environment, specify the OS Edition/Version too, not only the OS Name.

  • Make utilization of tables and lists wherever feasible. Stay away from protracted sections.

  • Have the test plan checked various times before baselining it or sending it for approving. The nature of your test plan says a lot about the quality of the testing you or your team is going to perform.

  • Overhaul the plan as and when essential. An out-dated and unused document smells bad and is more terrible than not having one in any case.

These were a few important things related to a software test plan. Software testing in Pune is of good quality..

More Related Blog:

  1. Software Testing- Quality Control And Quality Assurance
  2. Cost Of Quality In Software

Software Testing Techniques: Static Testing Vs Dynamic Testing

Software Testing Techniques: Static Testing Vs Dynamic Testing

CRB Tech is a premier training and placement institute that conducts software testing course in Pune.

Static testing and dynamic testing are two important techniques related to software testing. We will see them in detail in this blog.

These are vital testing techniques accessible for testers and developers in Software Development lifecycle. These are software testing methods which any company must pick precisely which to execute on the product or software application. So as to get the most out of every kind of testing, and pick the right tools for a given circumstance, it’s pivotal to comprehend the advantages and limitations of every sort of testing.

What do you understand by static testing?

Static Testing is kind of testing in which the code is not run. It is possible to carry it out manually or through automation tools. This kind of testing verifies the code, SRS and design documents and puts review remarks on the work document. At the point when the software is non –operational and dormant, testers perform security testing to break down the product in non-runtime environment. With static testing, we attempt to discover the errors, code defects and possibly malevolent code in the product application. It begins at a prior state in development life cycle and therefore it is likewise called verification testing. Static testing should is possible on work documents like source code, test plans, test scripts and test cases, site page content.

What do you understand by dynamic testing?

Dynamic testing is carried out when the code is in runtime mode. Dynamic testing is performed in runtime environment. At the point when the code being executed is passed with a value, the result or the output of the code is verified and compared with the expected result. With this we can watch the functionality of the software, verify the system memory, CPU reaction time, system performance. Dynamic testing is otherwise called validation testing , assessing the final product. Dynamic testing is of two sorts: Functional Testing and Non Functional testing.

Be that as it may, both Static Testing and Dynamic Testing are critical for the product application. There are number of qualities and shortcomings connected with both sorts of testing which ought to be considered while actualizing these testing on code:

Major points of difference between static and dynamic testing:

Static Testing

  • In this type of testing, methods like inspection, walkthrough, code review etc. are used.

  • This is related to prevention. The question needs to be asked “How we can prevent”?

  • As it can simply begin early in the life cycle, it certainly diminishes the expense of the entire project.

  • It can extract out errors which dynamic testing is not able to. It is a low level testing exercise.

  • The other name for static testing is “dry run” testing.

  • Takes place before dynamic testing.

Dynamic Testing

  • Methods like verification and validation are used.

  • This is concerned with cure. “How we cure”? is the question that needs to be asked.

  • As it is not beginning early in the life cycle subsequently it unquestionably builds the expense of product/project.

  • It is a high level testing method and can find out errors that static testing cannot.

  • No particular second name is used.

  • It is followed after static testing is done.

Taking everything into account, static testing is a vital testing technique that takes the type of Business requirement review, design reviews, functional requirement review, code walkthroughs and test documentation review. It is a ceaseless process and not done just by testers.

Validation, the dynamic testing part is more involved and happens on the product itself and not on a document or a representation of the product. A much formal procedure of test case/condition identification, scope contemplations, execution and error reporting all stamp the dynamic testing strategies.

If you wish to learn testing, look for proper software testing training in Pune.

More Related Blog::

Promising Career Options In the Software Testing Domain

Difference Between Functional Testing and Non-Functional Testing

The Concepts of Performance Testing

The Concepts of Performance Testing

Let us today try to understand the concepts of stress testing, performance testing and load testing in detail. They are a part of Software Testing.

1. Performance Testing:

Performance testing is the testing, which is performed, to find out how the various modules of a system are performing, given a specific circumstance. Asset utilization, reliability and scalability of the software are additionally tested under this testing. This type of testing is the subset of performance efficiency, which is centered around handling execution issues in the configuration and design of software product.

Purpose of Performance Testing:

Performance testing does not plan to discover Defects in the application, it addresses somewhat more important task of testing the benchmark and standard set for the application. Precision and close checking of the execution and results of the test is the essential characteristic of performance testing.

The primary objective of performance testing incorporates building up the benchmark behavior of the system. There are various industry-characterized benchmarks, which ought to be met amid performance testing.

2. Load Testing:

The sole reason for load testing is to dole out the software the biggest job it could conceivably handle to check the endurance and monitor the results. A fascinating truth is that occasionally the system is nourished with an empty task to watch the behavior of the system in zero-load circumstance.

Load testing is intended to test the system by always and relentlessly increasing the load on the system till the time it achieves the threshold limit. It is the least complex form of testing which implements the utilization of Automation Tool, e.g., LoadRunner or some other good tools, which are accessible. Load testing is likewise known by the names like endurance testing and volume testing. Rather than Manual Testing, automating the load testing process saves time as it involves repetitive tasks like increasing the load continuously.

Purpose of Load Testing:

The objectives of load testing are to uncover the defects in application identified with buffer overflow, mismanagement of memory and memory leakages. Another objective of load testing is to decide the upper thresholds of the number of segments of applications like database, hardware and networking and so on… with the goal that it could deal with the expected load in future. The issues that would inevitably turn out as the consequence of load testing may incorporate load balancing issues, bandwidth problems, limit of the current system and so forth…

3. Stress Testing:

The main aim behind stress testing is to ascertain the failure of the system and to check how the system recoups back effortlessly. The test here is to set up a controlled environment before dispatching the test with the goal that you could decisively catch the functioning of the system more than once, under the most erratic situations.

Under stress testing, different activities to overload the current assets with overabundance jobs are done trying to break the system. Negative testing, which incorporates expulsion of the components from the system is likewise done as a piece of stress testing. Otherwise called fatigue testing, this testing ought to catch the stability of the application by testing it past its bandwidth capacity limit.

Purpose of Stress Testing:

The main objective of stress testing is to examine post-crash reports to characterize the behavior of application after failure. The greatest issue is to guarantee that the system does not bargain with the security of sensitive information even after the failure . In an effective stress testing, the system will return to normalcy alongside every one of its components, after even the most loathsome failure.

So, if you want to learn these and practically apply them, then you need to take admission to a Software Testing Course In Pune.

Software Testing Training In Pune is provided by premier institutes like CRB Tech.

More Related Blog::

  1. Software Testing- Quality Control And Quality Assurance
  2. Cost Of Quality In Software

All You Need To Know About GUI (Graphical User Interface) Testing

All You Need To Know About GUI (Graphical User Interface) Testing

GUI testing is basically a test type that involves verification of the UI or the user interface of the software application you have developed. Ensuring that it is functioning as expected and is as per the system requirement specification document.

GUI testing is a testing technique can require a considerable measure of programming and is tedious whether manual or automated. Typically the product author works out the planned function of a menu or graphical button for clarity so that the testing guys won’t be befuddled with regards to the expected result. User interface testing likewise tends to test for certain project practices that clients expect, similar to a hourglass when the project is occupied, the F1 key raising the help system and numerous other regular points of interest.

Other than functionality, GUI testing assesses design components, e.g. design, colors, font sizes, and fonts, text boxes, headings, icons, buttons etc. GUI testing procedures can be either manual or automated, and are regularly performed by third – party organizations, as opposed to developers or end users.

There are two sorts of interfaces in a PC application. Command line prompt is the place you type text and PC reacts to that command. GUI means Graphical User Interface where you communicate with the computer utilizing pictures instead of text.

GUI is the thing that viewer sees. Say in the event that you visit crbtech.in what you will see say landing page it is the GUI (graphical user interface) of the site. A client does not see the source code. The interface is noticeable to the client. Particularly the emphasis is on the design structure, images that they are working appropriately or not.

Importance of GUI Testing:

An end user first watches the looks and design of the Application/Software and how simple it is for him to comprehend the UI. In the event that a client is not happy with the Interface or discover Application complex to comprehend he could never going to utilize that application again. That is the reason, GUI is a matter for concern, and appropriate testing ought to be completed keeping in mind the end goal to ensure that GUI is free of Bugs.

To get the answer think not as a tester but as an end user. An end user doesn’t have any information about XYZ application or software. It is the UI of the Application which chooses that a user is going to utilize the application or not.

Checklist forGUI Testing:

Here are a few parameters that need to be tested as a part of GUI testing:

  • Check all the GUI components for position, size, length, width and acceptance testing for characters, numbers. Case in point, you should have the capacity to give inputs to the input fields.

  • Test whether the warning and error prompts are fine and the text colour is aesthetically good or not.

  • Test different screen resolution compatibility for the various GUI controls.

  • Test the clarity of images and ensure that they appear sharp.

  • Test the alignment of images.

  • Ensure that the functionality of the software can be tested using the GUI.

  • Test that the error messages appear as expected.

These are a few, there are many more. You can check for those on the Internet.

Difficulties during GUI Testing:

The most widely recognized issue comes during regression testing is that the application GUI changes habitually. It is extremely hard to test and recognize whether it is a bug or an upgrade. The issue shows up when you don’t have any documentation with respect to GUI changes.

To conclude:

Success of a software application or a product tremendously relies on how the GUI communicates without breaking a sweat in utilizing its different components. Thus, GUI testing is vital. Manual GUI testing can some of the time be monotonous and exhausting and henceforth error inclined. Automation is profoundly suggested for GUI testing.

For learning GUI testing, enroll in a reputed software testing institute in Pune, just like CRB Tech.

More Related Blog::

Difference Between Functional Testing and Non-Functional Testing

Easy Method for Writing A Test Script